KOLSOL AT112 Network Ethernet LAN Phone Wire Tester USB Coaxial Cable With 8 Far-end Jacks BNC RJ45 RJ11 Line Finder Remote Cable Tracker

Product Description

KOLSOL AT112 Network LAN Phone Wire Tester With 8 Far-end Jacks BNC RJ45 RJ11

AT112 ADescription: 

This set equips multiple tester ports (RJ45, RJ45 Loopback, RJ11 & BNC) and is designed to detect and test a wide range of cable and circuit status including 5E/6E, USB cable, coaxial cable, telephone wire, STP/UTP, jumper wire, open/short circuit, reverse connection . It can also be used to locate wiring errors and make dynamical cable length calibration and measurement.   

AT112 Features:

• 8 far-end test jacks (ID1~ID8) included
• Multiple tester ports (RJ45,  RJ45 Loopback, RJ11 &  BNC)
• Complete the cable continuity check in a quick and easy way
• Tracking & checking 5E, 6E, USB cable, coaxial cable and telephone line, open circuit, short circuit, jumper wire, reverse connection 
• Locating wiring or connection errors
• Determining cable length and distance of open circuit and short circuit
• Dynamically calibrating cable length and making length measurement as accurate as 97%
• Large LCD with backlight
• Portable with long battery life (standby mode for over 50 hours)
• Auto time-delay shut off
• Measuring length and determine the Determine the distance of open-circuit and short-circuit
• Locating cable with 8 far-end passive test jacks (ID 1- ID 8)
• Far-end recognizer with prompting voice
• Self-checking function and auto compensate any change in battery capacity or ambient temperature
• Single board computer software watchdog design and reliable operation

AT112 Specification:
 

• Item size:
  • Main tester: approx. 185 (L) x 105 (W) x 50 (D) mm (7.28' x 4.13' x 1.97' inch)
  • Receiver: approx. 218 (L) x 46 (W) x 29 (D) mm (8.58' x 1.81' x 1.14' inch)
• Type of Cable Tested: STP / UTP twin twisted cable, coaxial cable, telephone line
• Type of Cable Detected: 5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires
• Power: 9V battery (Not Included)
• Tester Port :
• Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R).
• The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
• Scope: 1 ~ 350M (3 ~ 200 FT)
• Calibration accuracy: 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)
• Shipment accuracy: 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)
• Display: M or ft
• Length Measurement of Twin Twisted Cable:
• Length Calibration: User can set calibration factor by himself by a given length cable. The length of calibrating cable is more than 5M.
• Working Ambient Temperature: -10 ~ 60 °C (14 ~ 140 °F)

AT112 Technical indexes: 

Transmitter specification    
    
Tone frequency                                   455KHz    
Max. distance of transmission             2 km    
Max. distance of cable map                300m    
Max. working current             Less than 70mA    
Tone mode                          2 Tone adjustable    
Compatible connector  RJ11,RJ45,BNC,USB    
Max. signal voltage                    15Vp-p    
Function and faults LCD display    LCD display ( wiremap, Tone, short,    No adapter, Low  battery )    
Cable map indication              LCD (#1-#8)    
Shielded indication                      LCD ( #9)    
Battery Type                               DC9.0V x 1pcs    
Dimension(LxWxD)               185x80x32mm    

Receiver specification 
       
Frequency                                   455KHz    
The Max. working current     Less than 70mA    
Battery Type                                   DC9.0V x1pc    
Dimension(LxWxD)              218x46x29 mm  

Package List:

1 x Main Tester
1 x Receiver
8 x Remote Identifiers with Far-end Test Jacks ID1~ID8
1 x Earphone
4 x Cables
1 x Carrying Bag
1 x Instruction Manual
Standard factory package