KOLSOL ELM327 WIFI OBD2 Scanner V1.5 ELM327 with Switch Car Scanner

Out of Stock. Item No. SC364-C1

Weight:
0.1KG
Package:
19cm*12cm*2.5cm     ( Inch: 7.48*4.72*0.98 )

Product Description

KOLSOL ELM327 WIFI OBD2 Scanner V1.5 ELM327 Diagnostic Tool with Switch modified for Ford
 


Highlights:
1.The modified version of the ELM327 converts the HS-CAN and the MS-CAN.
2.It supports all OBD-II protocols.
3.Retrieve Fault Codes (DTCs) and clear Check Engine lights.
4.support FORD models open hidden function.
5.In addition to adding functionality to Ford, the device can also be used as a regular OBD2 / EOBD diagnostic on a vehicle.
6. Supported System: IOS ,Windows XP, Windows 7, Android, Symbian.
 
Functions:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL.
3.Display current sensor data, including:
l Engine RPM
l Calculated Load Value
l Coolant Temperature
l Fuel System Status
l Vehicle Speed
l Short Term Fuel Trim
l Long Term Fuel Trim
l Intake Manifold Pressure
l Timing Advance
l Intake Air Temperature
l Air Flow Rate
l Absolute Throttle Position
l Oxygen sensor voltages/associated short term fuel trims
l Fuel System status
l Fuel Pressure
Many others...
 
Vehicle Coverage:
America Chrysler, Dodge, Jeep, Ford, Chevrolet, Cadillac, Lincoln, Buick, Hummer, etc.
Asia Honda, Nissan, Lexus, Toyota, Mazda, Mitsubishi, Hyundai, Kia, Isuzu, Suzuki, Land Rover, Daewoo, Chery, BYD F3/F0, Infiniti, Subaru, etc.
Europe Audi, BMW, Citroen, Fiat, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Volvo, Volkswagen, Jaguar, Lamborghini, Maserati, Bentley, Rolls Royce, Porsche, Opel, Lancia, Mclaren , Ferrari, etc.
 Other mainstream models that comply with the international standard obd2 agreement.

Supported Software:
Torque-pro                         
Dashcmd
ScanMaster-ELM
scantool_net113
Forscan
FOCCCUS
 
Supported Protocols:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP (5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP (fast init,10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID,500 Kbaud)
7. ISO15765-4 CAN (29bit ID,500 Kbaud)
8. ISO15765-4 CAN (11bit ID,250 Kbaud)
9. ISO15765-4 CAN (29bit ID,250 Kbaud)
 

Specifications:
SSID: WiFi OBD
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches

ScanMaster-ELM Software Install :
You should follow the steps shown in the pictures below:
 
Step1: Open the ScanMaster-ELMv2.1 folder in the Computer-DVD/CD-RW Drive.
 
 
Step2: Double-click the ScanMaster-ELM_2.1.104.771 icon to start it.
 
 
Step3: You will see the following picture and click [Next].
 
 
Step4: Select the [I accept the agreement] option and click [Next] button.
 
 
Step5: Select the target location for the installation software.
 
 
Step6: Successful installation,there would be a shortcut on the desktop.
 
 
Step7: Open the software, set the complete user information and continue to operate.
 
 
Step8: Double-click the KeyGen-scanmaster-2.1 icon to get the registration keys.
 

Step9: Enter the installation code and click[Generate Key] button.
Then enter the registration keys to complete the registration.
 

WIFI Connection:
 
You need to configure your PC or cellphone before you can use this software.
For example, on a PC you should follow the steps shown in the pictures below:










 
 
ScanMaster-ELM Software Usage:
 
Double-click the ScanMaster-ELM icon to start it.
Click the button, choose WLAN in the drop list which resides in the tab named Communication.
Enter IP address 192.168.0.10 and port number 35000. Click [OK].
Now the software is ready to use.
 
 
Choose the language you need.
 

Click the [Connect] button in the lower left corner to connect the device.
 
 
The software is running
 
 
Read Trouble Codes
 
 
Read Live Data Grip
 

FoCCCus Software Usage:
 
Open the FoCCCus folder and you will see the FoCCCus icon.
 
 
Software port settings and device manager detected ports, both must be consistent.
Select the language and click the [Open] button.
 
 
These are what you’ll see when the software is running:
 
 
 
 
Package includes:
 
1PC x KOLSOL ELM327 WIFI OBD2 Scanner V1.5
1PC x CD-ROM