KOLSOL ELM327 Bluetooth OBD2 Scanner V1.5 ELM327 with Switch modified for Ford CH340+25K80 chip HS-CAN / MS-CAN

Out of Stock. Item No. SC364-B1

Weight:
0.1KG
Package:
19cm*12cm*2.5cm     ( Inch: 7.48*4.72*0.98 )

Product Description

KOLSOL ELM327 Bluetooth OBD2 Scanner V1.5 ELM327 Diagnostic Tool with Switch modified for Ford
 


Highlights:
1.The modified version of the ELM327 converts the HS-CAN and the MS-CAN.
2.It supports all OBD-II protocols.
3.Bluetooth connection.
4.Wireless (Bluetooth) 5~10 meter.
5.support FORD models open hidden function.
6.In addition to adding functionality to Ford, the device can also be used as a regular OBD2 / EOBD diagnostic on a vehicle.
7. Supported System: IOS ,Windows XP, Windows 7, Android, Symbian.
 
Functions:
1.Read diagnostic trouble codes,both generic and manufacturer-specific,and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL. 
3.Display current sensor data,including:
v Engine RPM
v Calculated Load Value
v Coolant Temperature
v Fuel System Status
v Vehicle Speed
v Short Term Fuel Trim
v Long Term Fuel Trim
v Intake Manifold Pressure
v Timing Advance
v Intake Air Temperature
v Air Flow Rate
v Absolute Throttle Position
v Oxygen sensor voltages/associated short term fuel trims
v Fuel System status
v Fuel Pressure
Many others...
 
Vehicle Coverage:
America Chrysler, Dodge, Jeep, Ford, Chevrolet, Cadillac, Lincoln, Buick, Hummer, etc.
Asia Honda, Nissan, Lexus, Toyota, Mazda, Mitsubishi, Hyundai, Kia, Isuzu, Suzuki, Land Rover, Daewoo, Chery, BYD F3/F0, Infiniti, Subaru, etc.
Europe Audi, BMW, Citroen, Fiat, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Volvo, Volkswagen, Jaguar, Lamborghini, Maserati, Bentley, Rolls Royce, Porsche, Opel, Lancia, Mclaren , Ferrari, etc.
 Other mainstream models that comply with the international standard obd2 agreement.


Supported Software:
Torque-pro                                  
Dashcmd 
OBDScope Symbian
ScanMaster-ELM
scantool_net113
Forscan
FOCCCUS
 
Supported Protocols:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP (5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP (fast init,10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID,500 Kbaud)
7. ISO15765-4 CAN (29bit ID,500 Kbaud)
8. ISO15765-4 CAN (11bit ID,250 Kbaud)
9. ISO15765-4 CAN (29bit ID,250 Kbaud)

 
 
ScanMaster-ELM Software Install :
You should follow the steps shown in the pictures below:
 
Step1: Open the ScanMaster-ELMv2.1 folder in the Computer-DVD/CD-RW Drive.
 
 
Step2: Double-click the ScanMaster-ELM_2.1.104.771 icon to start it.
 
 
Step3: You will see the following picture and click [Next].
 
 
Step4: Select the [I accept the agreement] option and click [Next] button.
 
 
Step 5: Select the target location for the installation software.
 
 
Step6: Successful installation,there would be a shortcut on the desktop.
 
 
Step7: Open the software, set the complete user information.Then click [Continue].
 
 
Step8: Double-click the KeyGen-scanmaster-2.1 icon to get the registration keys.
 

Step9: Enter the installation code and click[Generate Key] button.
Then enter the registration keys to complete the registration.
 
 
Bluetooth Connection:
 
You should follow the steps shown in the pictures below:
Step1: Click [Add a Device] button.
 
 
Step2: Select the [ OBDII ] option for the next step.
 

Step3: [Select a pairing option]-[Enter the device’s pairing code].
 
 
Step4: Enter the pairing password 1234 or 0000.
 

Step5: This device has been successfully added to your computer.
 

ScanMaster-ELM Software Usage:
 
Open ScanMaster-ELM software and select the interface type: Blue Tooth;
Click on the [Search Devices] button to see the devices you have searched for;
Click the [Test] button to test.
 
 
Test successful.ELM device found.
 
 
Choose the language you need.
 
 
Click the [Connect] button in the lower left corner to connect the device.
 
 
Computer detected interface version V1.5
 
 
Read Trouble Codes
 

Read Live Data Grip
 

FoCCCus Software Usage:
 
Open the FoCCCus folder and you will see the FoCCCus icon.
 
 
Software port settings and device manager detected ports, both must be consistent.
Select the language and click the [Open] button.
 
 
These are what you’ll see when the software is running:
 
 
 
 
Package includes:
 
1PC x KOLSOL ELM327 Bluetooth OBD2 Scanner V1.5
1PC x CD-ROM